Rebuildbcd Identified Windows Installations 0

Hey all, I'm helping a buddy of mine repair his laptop (we've all been there before! Digital Electronics By J S Katre Pdf Download more. ) and I'm stumped. He claimed he didn't do anything wrong to it, but apparently, the laptop displays the 'BOOTMGR is missing.

I tried many solutions listed in the forums (such as using the startup repair tool with 3 reboots, using bootrec /rebuildbcd, etc) but to no avail. Right now I'm trying to rewrite my bcd, but bootrec /rebuildbcd returns 0 available operating system installed. What should I do? Sorry if this post is a bit convoluted,. Oct 21, 2017 - 42 sec - Uploaded by TechFixITCMD Error: 0 Windows Installations Found Solution. No Windows Installations Found SOLVED!

Press Ctrl Alt Del to restart'. I've tried the following, all to no avail: Ran Startup Repair 3 separate times - it either found problems it couldn't repair, or repaired the problems, which didn't help. Bootsect /nt60 c: BootRec /FixMbr - BootRec /FixBoot BootRec /ScanOs - I get the message 'Total identified Windows installations: 0' BootRec /RebuildBcd - I get the message 'Total identified Windows installations: 0' sfc /scannow - the scan won't run at all. I get a 'Windows Resource Protection can't run now', or something similar I removed the drive and hooked it up to a couple of different Windows machines using different drive docks just to be sure the drive wasn't bad. It mounted with no issue, and the drive had three partitions: one with the main Windows files on them, one labeled 'RECOVERY' which is probably an OEM partition, and another 200MB partition which I assume is the Windows 7 System Protection partition. I ran chkdsk on the drive, and it ran without issue, however when it reached the end, the scan locked up, and chkdsk wouldn't finish, even after several hours, so I canceled it. I've also checked the SATA cable in the laptop, and it's fine.

I've also checked the drive for viruses with AVG, but it came up clean. After attempting to manually repair the bootmgr with the commands above, I decided to get a little more in depth. I attempted to copy over the bootmgr file from the Windows 7 isntall DVD that I have, which didn't help. I also decided to follow the advice from EasyBCD's website on recovering the. Unfortunately, none of that worked either.

I decided to move the active partition from the System Reserved partition to the primary Windows partition, so that it would simply the process of rebuilding the bootloader. I've included a screenshot of the drive from Disk Management for reference. It's attached at the end of the post. After making that active, I tried running the command prompt repairs again, but no luck. However, after I installed EasyBCD, I decided to try rebuilding the MBR and bootloader files on the Windows partition using that program. I did have some better luck here: after starting Windows Startup Repair, it recognized a Windows partition, however it reported the installation as being 0MB!